如何编写这个LINQ查询

本文关键字：LINQ 查询 何编写 | 更新日期: 2023-09-27 18:13:29

嗨，我有一个包含以下字段的数据表

DAT_START
GROUPBY
TXT_LATITTUDE
TXT_LONGITUDE
INT_DIRECTION
INT_CALL_DATA_TYPE
LNG_DURATION

下面是我使用的LINQ查询

var data = (from r in dt.AsEnumerable()
where ((r.Field<DateTime>("DAT_START").TimeOfDay.Hours < 20) && (r.Field<DateTime>("DAT_START").TimeOfDay.Hours >= 4))
group r by new { CID = r["GroupBy"], CLatitude = r["TXT_LATITUDE"], CLongitude = r["TXT_LONGITUDE"],CDirection = r["INT_DIRECTION"], 
CCallType = r["INT_CALL_DATA_TYPE"],CDuration = r["LNG_DURATION"] }
into groupedTable
select new
{
   CellID = groupedTable.Key.CID,
   CallCount = groupedTable.Count(),
   Longitude = groupedTable.Key.CLongitude,
   Latitude = groupedTable.Key.CLatitude,
   Direction = groupedTable.Key.CDirection,
   CallType = groupedTable.Key.CCallType,
   Duration = groupedTable.Key.CDuration
}).OrderByDescending(s => s.CallCount);

结果如下

CellID = 4057,CallCount = 84,Longitude = "",Latitude = "",Direction = "Incoming",CallType = "Voice",Duration = 50
CellID = 4057,CallCount = 8,Longitude = "",Latitude = "",Direction = "Outgoing",CallType = "Voice",Duration =97
CellID = 4057,CallCount = 56,Longitude = "",Latitude = "",Direction = "Incoming",CallType ="SMS" ,Duration = 0
CellID = 4057,CallCount = 41,Longitude = "",Latitude = "",Direction = "Outgoing",CallType = "SMS",Duration = 0

现在我想要这样的结果

CellID = 4057, TotalCommCount = 204, TotalDuration = 147, INSMSCount = 56,OutSMSCount = 41, INVoiceCount = 84,OutVoiceCount = 8,InVoiceDuration =50,OutVoiceDuration = 47

我该怎么做呢?

如何编写这个LINQ查询

看起来你现在分组太多了，这就是为什么你得到多行。我猜你想要这样的东西:

from r in dt.AsEnumerable()
where r.Field<DateTime>("DAT_START").TimeOfDay.Hours < 20 && 
      r.Field<DateTime>("DAT_START").TimeOfDay.Hours >= 4
group r r["GroupBy"] into g         
select new
{
    CellID = g.Key,
    TotalCommCount = g.Count(),
    TotalDuration = g.Sum(r => r.Field<long>("LNG_DURATION")),
    InSMSCount = g.Count(r => r.Field<string>("DIRECTION") == "Incoming" &&
                              r.Field<string>("CALL_TYPE") == "SMS"),
    OutSMSCount = g.Count(r => r.Field<string>("DIRECTION") == "Outgoing" &&
                               r.Field<string>("CALL_TYPE") == "SMS"), 
    InVoiceCount = g.Count(r => r.Field<string>("DIRECTION") == "Incoming" &&
                                r.Field<string>("CALL_TYPE") == "Voice"),
    OutVoiceCount = g.Count(r => r.Field<string>("DIRECTION") == "Outgoing" &&
                                 r.Field<string>("CALL_TYPE") == "Voice"),
    InVoiceDuration = g.Where(r => r.Field<string>("DIRECTION") == "Incoming" &&
                                r.Field<string>("CALL_TYPE") == "Voice")
                       .Sum(r => r.Field<long>("DURATION"))
    OutVoiceDuration = g.Where(r => r.Field<string>("DIRECTION") == "Outgoing" &&
                                    r.Field<string>("CALL_TYPE") == "Voice"),
                       .Sum(r => r.Field<long>("DURATION"))
 } into summary
 order by summary.TotalCommCount descending
 select summary;

我建议你在SQL数据库中创建一个视图，在那里你可以简单地聚合你需要的东西，然后在你的Linq查询中使用该视图-这将执行得很快，而且很容易编写。

设计草图:

由于你的需求描述不完全清楚，我做了假设。创建一个SQL视图，如(这只是为了显示思路，根据您的需要更改它):

CREATE VIEW [dbo].[vSumDurations]
AS 
select  c.CellId, j1.SumDuration1 as TotalDuration, 
        j2.SumDuration2 as GroupedDuration, j1.CallCount  
from (select distinct t.CID as CellId from [dbo].[YourTable] t) c
left join (select t1.CID as CellId, sum(LNG_Duration) as SumDuration1, 
            count(*) as CallCount from [dbo].[YourTable] t1 
            Group By t1.CID) j1 
on c.CellId=j1.CellId           
left join (select t2.CID as CellId, sum(LNG_Duration) as SumDuration2 
            from [dbo].[YourTable] t2 
            Group by t2.CID, t2.Direction, t2.CallType) j2 
on c.CellId=j2.CellId

(您可以轻松地将此视图添加到*。通过在实体图页面的上下文菜单中使用"从数据库更新模型"，然后在弹出的对话框的"表/视图"部分勾选视图vsumduration

在此准备之后，您的Linq查询非常简单，因为所有内容都已经在视图中完成了。因此，代码看起来像: 
var dc = this; // in LinqPad you can set your data context
var data = (from d in dc.vSumDurations select d).OrderByDescending(s => s.CallCount);
data.Dump();

注意:这个例子是为LinqPad做的-在你的实际代码中你将需要一个不同的数据上下文。Linqpad不需要dc，但如果出于方便的原因声明它会更容易，因为在实际代码中必须提供它。

相关文章：