如何在代码隐藏中实现.cs文件中调用方法
本文关键字：cs 文件 调用 方法 实现 代码 隐藏 | 更新日期: 2023-09-27 18:32:13
我在文件后面的代码中有一个按钮单击事件，如下所示：
protected void btnArchive_Click(object sender, EventArgs e)
{
try
{
if (projectId == 0)
{
return;
}
Int32 serverPathId = 0;
ProjectArchiveResponse archiveResponse;
if (!int.TryParse(this.ddlSourceServer.SelectedValue, out serverPathId))
return;
if (string.IsNullOrEmpty(hidFileCount.Value))
{
this.ShowMsg(this.divMessage, Resources.Resource.ProjectFileArchiveNotAllowed, MessageType.Failed);
//The project files couldn't be archived until archive operation was completed.
return;
}
ProjectManager projectManager = new ProjectManager(null, BasePage.GetCurrentUser(), null) { IsServiceCall = false};
try
{
archiveResponse = projectManager.StartProjectArchive(projectId, false, () =>
{
foreach (Control control in tdFileList.Controls.Cast<Control>())
{
if (control is Dell.AFP.UserControl.ProjectFileListBaseControl)
{
((ProjectFileListBaseControl)control).Refresh();
}
}
}, false);
if (archiveResponse.MassivePackageID > 0)
{
this.ViewState["transferPackageId"] = archiveResponse.MassivePackageID;
PopupMonitor(archiveResponse.MassivePackageID);
}
//handled for any erorrs while submitting massive package or any unhandled exceptions will be taken care here
if (archiveResponse._CustomError != null && !string.IsNullOrEmpty(archiveResponse._CustomError.Erorrmessage))
{
if (!archiveResponse._CustomError._Erorrtype.Equals(MessageType.Info))
logger.ErrorFormat("Error occurred with details : {0}", archiveResponse._CustomError.Erorrmessage);
ShowMsg(divMessage, archiveResponse._CustomError.Erorrmessage, (MessageType)archiveResponse._CustomError._Erorrtype);
}
}
catch (KnownErrorException ke)
{
//logger.Fatal("UnExpected exception occured. Exception Details " + ke.Message);
logger.Fatal(ke.Message);
if (ke.Error.Type.Equals(DELL.AFP.Management.Exceptions.ErrorType.Warning))
this.ShowMsg(this.divMessage, ke.Message, MessageType.Info);
else
this.ShowMsg(this.divMessage, ke.Message, MessageType.Failed);
}
catch (Exception ke)
{
logger.ErrorFormat("UnExpected exception has occured with details : {0} - {1}", ke.Message, ke.StackTrace);
//ShowMsg(divMessage, "UnExpected exception has occured. Details are logged. Please try after sometime", MessageType.Failed);
ShowMsg(divMessage,ke.Message, MessageType.Failed);
}
}
在这种情况下，我正在调用一个方法 启动项目存档 它在项目经理.cs文件中
项目经理.cs中的 StartProjectArchive 方法如下：
public ProjectArchiveResponse StartProjectArchive(int projectID, bool promoteAfterArchive, Action uiRefresh, bool waitTillTransfered, string archiveNotificationUrl = null)
{
ProjectArchiveResponse projectArchiveResponse = new ProjectArchiveResponse() { ProjectID = projectID, MassivePackageID = -1 };
string sourceServerPath = String.Empty;
int packageID =0;
Int32 sourceServerPathID = GetSourceServerPath(projectID, out sourceServerPath);
var filesWhichNeedsToBeArchived = GetFilesWhichNeedsToBeArchived(projectID, sourceServerPathID, uiRefresh);
if (objFilesNotInSourceServer != null && objFilesNotInSourceServer.Count > 0)
KnownErrorException.Throw("ePRJARCMISSFILE01", string.Join(",", objFilesNotInSourceServer.ToArray()));
if (filesWhichNeedsToBeArchived != null)
{
MassiveServiceClientProxy proxy = new MassiveServiceClientProxy();
Dictionary<string, string> files = new Dictionary<string, string>();
filesWhichNeedsToBeArchived.Select(file => new
{
SourcePath = file.FileName,
DestinationPath = Path.Combine(ConfigurationManager.AppSettings["ArchiveProcessPrefixFolder"],
Path.GetDirectoryName(file.FileName), Path.GetFileName(file.FileName),
projectFilelist.Where(pf => string.Compare(pf.FileName, file.FileName, true) == 0).First().VersionID.ToString(),
Path.GetFileName(file.FileName))
}).ToList().
ForEach(file =>
{
if (!files.ContainsKey(file.SourcePath))
files.Add(file.SourcePath, file.DestinationPath);
});
if (files.Count > 0)
{
string packageDescription = "AFP 4.0: " + projectID.ToString(),
targetServerGroupName = archiveServer.MassiveServerGroupName,
userSuppliedId = "AFP 4.0: " + EndUserInfo.UserName;
try
{
packageID = proxy.SubmitPackageWithDestinationPath(files, packageDescription, new[] { sourceServerPath },
targetServerGroupName, userSuppliedId, MassiveService.MassivePriority.URGENT, true);
}
catch (Exception ex)
{
if (IsServiceCall == true)
KnownErrorException.Throw("wPRJARCMASER01");
else
return new ProjectArchiveResponse() { _CustomError = new CustomError { _Erorrtype = Model.ErrorType.Failed, Erorrmessage = ex.Message } };
}
if (packageID > 0)
{
ProjectFileBizManager projectFileBM = new ProjectFileBizManager();
projectFileBM.InsertArchiveTransferPackageByProjectFileList(
GetProjectFileIDsByFileName(projectID, filesWhichNeedsToBeArchived.Select(file => file.FileName).ToArray()), filesWhichNeedsToBeArchived.Select(file => file.FileName).ToArray(), packageID, projectID, EndUserInfo.UserId);
TransferPackageBizManager transferPackageBM = new TransferPackageBizManager();
if (promoteAfterArchive)
{
transferPackageBM.UpdateTransferPackageFeature(packageID, promoteAfterArchive);
}
projectArchiveResponse.MassivePackageID = packageID;
if (waitTillTransfered)
{
Task<ProjectArchiveResponse> mainTask = Task<ProjectArchiveResponse>.Factory.StartNew(
() =>
{
Task<Enums.TransferStatusEnum> packageTransfer = Task<Enums.TransferStatusEnum>.Factory.StartNew(
() =>
{
try
{
TransferPackage transferPackage = null;
while (true)
{
transferPackage = transferPackageBM.GetTransferPackage(packageID);
if (transferPackage.TransferStatus.TransferStatusId == (int)Enums.TransferStatusEnum.Submitted || transferPackage.TransferStatus.TransferStatusId == (int)Enums.TransferStatusEnum.Transferring)
Thread.Sleep(8000);
else
break;
}
logger.DebugFormat("Massive package status : {0} for Package : {1}", (Enums.TransferStatusEnum)transferPackage.TransferStatus.TransferStatusId, transferPackage.TransferPackageId);
return (Enums.TransferStatusEnum)transferPackage.TransferStatus.TransferStatusId;
}
catch (Exception exp)
{
logger.ErrorFormat("Project Archive Error, while trying to find massive package status : {0}", exp);
return Enums.TransferStatusEnum.Submitted;
}
});
try
{
Int32 timeOutInMins = (ConfigurationManager.AppSettings["ProjectArchive_PackageMonitorTimeoutInMinutes"] == null) ? 60 :
Convert.ToInt32(ConfigurationManager.AppSettings["ProjectArchive_PackageMonitorTimeoutInMinutes"]);
if (!Task.WaitAll(new Task[] { packageTransfer }, timeOutInMins * 60 * 1000))
{
projectArchiveResponse.Timedout = true;
projectArchiveResponse.TransferStatus = Enums.TransferStatusEnum.Submitted;
}
else
projectArchiveResponse.TransferStatus = packageTransfer.Result;
logger.DebugFormat("Project Archive Response, Project ID: {0}'n Package ID : {1},'n IsTimedout : {2},'n Timeout value : {3} minutes, 'n Transfer Status : {4}", projectArchiveResponse.ProjectID, projectArchiveResponse.MassivePackageID, projectArchiveResponse.Timedout, timeOutInMins, projectArchiveResponse.TransferStatus);
}
catch (Exception exp)
{
logger.ErrorFormat("Project Archive Error, while waiting to fetch massive package status : {0}", exp);
}
return projectArchiveResponse;
});
if (!string.IsNullOrEmpty(archiveNotificationUrl))
{
mainTask.ContinueWith((a) =>
{
try
{
AFPArchiveNotifyProxy archiveNotification = new AFPArchiveNotifyProxy();
ArchiveNotificationService.ProjectArchiveResponse archiveResponse = new ArchiveNotificationService.ProjectArchiveResponse()
{
MassivePackageID = a.Result.MassivePackageID,
ProjectID = a.Result.ProjectID,
IsTimedout = a.Result.Timedout,
ArchiveStatus = (Enum.Parse(typeof(ArchiveNotificationService.ArchiveStatusEnum), (a.Result.TransferStatus.ToString())) as ArchiveNotificationService.ArchiveStatusEnum?).Value
};
MassiveServiceClientProxy massiveServiceClientProxy = new MassiveServiceClientProxy();
FileTransferRequest[] fileTransferRequests = massiveServiceClientProxy.GetFileStatus(a.Result.MassivePackageID);
archiveResponse.Files = fileTransferRequests.Select(f => f.FileName).ToArray();
archiveNotification.ProjectArchiveUpdate(archiveNotificationUrl, archiveResponse);
logger.DebugFormat("Project Archive Response Notification, Project ID: {0}'n Package ID : {1},'n IsTimedout : {2},'n Archive Status :{3},'n Notification Url : {4},'n Total Files : {5}", archiveResponse.ProjectID, archiveResponse.MassivePackageID, archiveResponse.IsTimedout, archiveResponse.ArchiveStatus, archiveNotificationUrl, archiveResponse.Files.Count());
logger.DebugFormat("Package ID : {0}, Files : {1}", archiveResponse.MassivePackageID, string.Join(",", archiveResponse.Files.ToArray()));
}
catch (Exception exp)
{
logger.ErrorFormat("Project Archive Error, while invoking archive notification : {0}", exp);
}
});
projectArchiveResponse.TransferStatus = Enums.TransferStatusEnum.Submitted;
return projectArchiveResponse;
}
else
{
mainTask.Wait();
}
}
}
else
{
if (IsServiceCall == true)
KnownErrorException.Throw("ePRJARCMASS01");
else
return new ProjectArchiveResponse() { _CustomError = new CustomError { _Erorrtype = Model.ErrorType.Failed, Erorrmessage = "Massive has not returned the massive packageid" } };
}
}
else
{
// this.ShowMsg(this.divMessage, Resources.Resource.NoFilesToArchive, MessageType.Info);
if (IsServiceCall == true)
KnownErrorException.Throw("wPRJARCNOFILES01");
else
return new ProjectArchiveResponse() { _CustomError = new CustomError { _Erorrtype = Model.ErrorType.Info, Erorrmessage = "There are no files to archive" } };
}
}
return projectArchiveResponse;
}
在这里，我们将一个参数作为 "操作uiRefresh" . 我们将此uiRefresh称为方法GetFilesWhichNeedsToBeArchived，该方法startArchiveProject方法中。tunrn 中的此刷新方法调用代码隐藏文件中的方法。当我们在文件隐藏的代码中调用startArchiveProject时，这是作为控件传递的。现在我还有一件事需要实现。我在文件后面的代码中有一个方法弹出文件。我需要在方法GetFilesWhichNeedsTobeArchive内的项目经理.cs类中调用它。在该弹出窗口中，我将有一个按钮和复选框。在选择用户时，我需要从弹出窗口中获取详细信息，然后我必须继续在ProjectManger.cs页面中执行剩余的执行。
有人可以帮忙吗？
假设你有一个名为btnArchive的按钮，然后是添加点击事件订阅，指向你拥有的方法（看起来像点击事件句柄过程）
btnArchive.Click+=(s,e)=>btnArchive_Click(s,e);
问候