From arduino to netmf

有人可以帮我把一些代码从arduino项目翻译成netmf吗？这是我从一个arduino项目中得到的：

int angle = 3000//angle is int 500 to 5500
unsigned int temp;
byte pos_hi,pos_low;
temp = angle & 0x1f80;  //get bits 8 thru 13 of position
pos_hi = temp >> 7;     //shift bits 8 thru 13 by 7
pos_low = angle & 0x7f; //get lower 7 bits of position

这将如何转换为 C# 中的 netmf 项目？

uint angle = 3000;//angle is int 500 to 5500
uint temp;
byte pos_hi,pos_low;
temp = angle & 0x1f80;  //get bits 8 thru 13 of position
pos_hi = (byte) (temp >> 7);     //shift bits 8 thru 13 by 7
pos_low = (byte) (angle & 0x7f); //get lower 7 bits of position